Serial no.: 95299091
Load capacity: approx. 5,000 kg
Span width 25 m
Note: Dismantling and collection from December 2023.
Item number: 012614
Item location DE - 03226 Vetschau/Spreewald | Cut...
Condition: as good as new
Dimensions:
Volume: 9 m³
Internal body length: 5,000 mm
Internal body width: 2,350 mm
Internal body height: 900 mm
Technical data:
Special equipment:...
schwere Ausführung, Eigengewicht 5.660 kg, ca. 4.000 x 1.200 x 2.100 mm, Übersetzung: 305,40
Postennummer: 018530
Postenstandort DE- 39288 Burg bei Magdeburg
Seriennummer: 383936
Baujahr: 1996
Zulässiges Gesamtgewicht: 7.700 kg
Zulässige Achslast hinten: 6.500 kg
Schneidwerk
Bedienterminal
Zapfwelle
Postennummer: 013154
Postenstandort DE- 26441 J...
Condition: as good as new
Dimensions:
Volume: 13 m³
Internal body length: 6,500 mm
Internal body width: 2,350 mm
Internal body height: 900 mm
Technical data:
Special equipment...
Hubhöhe 4.500 mm, Eigengewicht 4.147 kg, Nenntragkraft 2.500 kg, Betriebsstunden 9/22, 15.810 (abgelesen), mit Seitenhub
Postennummer: 018543
Postenstandort DE- 39288 Burg bei Magdeburg
Seriennummer: JH 48491
Baujahr: 2008
Gewicht: 3.550 kg
Postennummer: 013155
Postenstandort DE- 26441 Jever
max. permissible pressure approx. 31 bar, test pressure approx. 56 bar, steam output approx. 300 kg/h, burner type: Weishaupt, heating oil
Seriennummer: 48317
Arbeitsbreite: 3,0 m
Kreiselegge
Spuranreißer
Striegel
Postennummer: 013149
Postenstandort DE- 26441 Jever
Serial number: 95299091
Load capacity: approx. 5,000 kg
span: 25 m
Note: Dismantling and collection from December 2023.
Load capacity: approx. 3,200 kg
Span: 20 m
Radio remote control
electric cable hoist
Note: Dismantling and collection from December 2023.
Baujahr: 2016
Flächenleistung: 3.162 Hektar
Grenzstreueinrichtung
Arbeitsbreite 30m
Postennummer: 013159
Postenstandort DE- 16928 Seefeld
Fahrgestellnummer: WDB9066111S400078
HU: 07/2024
Laufleistung: ca. 267.433 km
Werkstatteinrichtung ohne Werkzeuge
Anhängerkupplung
Postennummer: 013150
Postenstandort DE- 26441 Jever
Year of manufacture: 2008 Weight: approx. 285 kg
different types, stored on 5 Euro pallets, without Euro pallets, exchange pallets if necessary
Year of construction: 2013
Serial number: 99510021418
with workbench
under table, 1,400 mm wide
integrated. Telescopic drawer cabinet
5 pull-outs
with 15" Terra monitor
keyboard
mouse
Dymo 45...
Leistung 7,5 kW, 400 V, 50 Hz
Postennummer: 018584
Postenstandort DE- 39288 Burg bei Magdeburg
2.860 l/min
Postennummer: 018586
Postenstandort DE- 39288 Burg bei Magdeburg
Center height width: approx. 400 x 1,500 mm
Speed range: approx. 10-1,000 rpm
2-axis digital display RSF Z520
Baujahr: 2008, maximaler Drehmoment 14.000 Nm, Drehgeschwindigkeit 2.600 mm/min, Tragfähigkeit 25.000 kg, Eigengewicht 2.100 kg
Postennummer: 018313
Postenstandort DE- 39288 Burg bei Magdeburg
Baujahr: 2008, maximaler Drehmoment 14.000 Nm, Drehgeschwindigkeit 2.600 mm/min, Tragfähigkeit 25.000 kg, Eigengewicht 2.100 kg
Postennummer: 018312
Postenstandort DE- 39288 Burg bei Magdeburg
Open box lorry with loading crane
Gearbox: manual
Fahrgestellnummer: WDB9702771L409269
Registration number: E-WT 1918
First registration: 22.01.2009
Colour: white
Mileage: approx.: 660,000 km
...
Size: 600/840
Desktop: CNC/3D system Stepcraft 2-420
tool changing attachment for HF350/HF500
handwheel type: UCR201
laser, type: DL445
spindle, type: HF350/HF500
with monitor, make: Samsung
Fahrgestellnummer: WDB9066331S503547
Erstzulassung: 09/2010
Hubraum: 2.143
Leistung: 95 kW
Laufleistung: ca. 272.424 km
TÜV 08/2025
Werkstatteinrichtung ohne Werkzeuge
Anhängerkupplung
Poste...
Condition: as good as new
Dimensions/weights:
Hook height: 1,570 mm
Useful length: 6,500 mm
Effective width: 2,550 mm
Total weight: 15,000 kg
Unladen weight: approx. 1,760 kg
Payload: ...
Size: 600/840
Desktop: CNC/3D system Stepcraft 2-420
tool changing attachment for HF350/HF500
handwheel, type: UCR201
laser, type: DL445
spindle, type: HF350/HF500
with monitor, make: no name
Fahrgestellnummer: WDB9066111S357639
Erstzulassung: 10/2008
Hubraum: 2.148
Leistung: 80 kW
Laufleistung: ca. 332.316 km
TÜV 12/2024
Anhängerkupplung
Postennummer: 013151
Postenstandort DE- ...
Dimensions: 1600x600x1220 mm
Center width 800 mm
Center height 165 mm
Spindle bore 38 mm
Condition: as good as new
Dimensions/weights:
Hook height: 1,570 mm
Useful length: 6,500 mm
Usable width: 2,500 mm
Total weight shown: 15,000 kg
Unladen weight: approx. 2,000 kg
Payloa...
Eigengewicht ca. 2.000 kg, Tragkraft ca. 230 kg, Bauhöhe ca. 2.000 mm, Plattformmaße ca. 2.260 x 810 mm
Postennummer: 018291
Postenstandort DE- 39288 Burg bei Magdeburg
Serial number: 1370309063
Load capacity: approx. 1,000 kg
Speed range: 0.08-1 rpm
Groove clamping table
diameter: 1,000 mm
height adjustable
Year of manufacture: 1995
Serial No.: 595911951
measuring plate: approx. 5.000 x 3.000 mm
travel X/Y/Z: approx. 4.300 x 1.600 x 1.800 mm
with probe Renishaw MIHTP6
2 PCs
1 data cabinet, wall mou...
Year of manufacture: 2006
Weight: approx. 1,650 kg
Serial no.: 95299091
Load capacity: approx. 5,000 kg
Span width 25 m
Note: Dismantling and collection from December 2023.
Item number: 012614
Item location DE - 03226 Vetschau/Spreewald | Cut...
with ext. Wire feeder, type VR 5000
Leistung 4 kW, 400 V, 50 Hz
Postennummer: 018585
Postenstandort DE- 39288 Burg bei Magdeburg
different types
Serial number: 500994 Pressing force: 400 kN Operating pressure: max. approx. 32.6 mPa Year of manufacture: 2002
Betriebsstunden 35.565 (abgelesen), ca. 2.100 x 1.000 x 1.950 mm
Postennummer: 018545
Postenstandort DE- 39288 Burg bei Magdeburg
mit Atemschutzmaske und Filter, in Tragetasche, Typ Speedglas
Postennummer: 017347
Postenstandort DE- 39288 Burg bei Magdeburg
zwangsgesteuert, unterschiedl. Typen, lagernd auf 5 Europaletten, ohne Europalette, ggf. Austauschpalette
Postennummer: 017281
Postenstandort DE- 39288 Burg bei Magdeburg
Eigengewicht 2.850 kg, Hubhöhe 3.300 mm, Hublast 1.500 kg, Baujahr: 1991, Betriebsstunden 05820 (abgelesen)
Postennummer: 018544
Postenstandort DE- 39288 Burg bei Magdeburg
Year of manufacture: 2019
Motor power 400 V 1.5 kW 50 Hz
Inv-No. 6.014.16
lifting capacity: approx. 8.000 kg
with electric wire rope hoist and floor operation
Note: Dismantling and collection from December 2023.
Item number: 012483
Item location DE...
with accessory bezel 4-jaw chuck
Groove base plate
approx. 2,200 x 4,500 x 550 mm
2 stamp holders
movable
with a total of 6 stamps
height adjustable
max. workpiece height: approx. 1,000 mm
without metal scrap residues
Year of construction: 2007, volume flow approx. 1,000 m³/h
We are happy to help you:
Monday till Friday
08:00 - 17:00
Phone: +49 (0) 40 554 931 400
Email: info@greenfield-auctions.com
Register
Thank you for your subscription.
An error has occured during the subscription. Please try again later.
Whether power tools, hand tools or battery tools - it is not uncommon for a high investment requirement to arise for these mobile assets. It is therefore worthwhile to take part in a tool auction at Greenfield Auctions!
At our tool auctions, every tool is sure to find a new owner. Unlike the usual purchase of second-hand goods, a tool auction offers tangible advantages. After all, you don't have to deal with lengthy negotiations and different sellers.
At a tool auction, various tools from company insolvencies, company liquidations, workshop liquidations, etc. are auctioned off for the highest bid.
The bidder with the highest willingness to pay is awarded the item he has chosen in advance. A large selection of tools is auctioned off.
Whether individual power tools, a collection of hand tools or special tools. In tool auctions, interested parties from a wide range of industries find what they are looking for. In this area, the range is large and is carried out by numerous auction houses.
Everything that is suitable for cutting, shaping and joining materials can be found at an Greenfield Auctions tool auction.
The advantages of participating in a tool auction are obvious. After all, at such an auction you can often buy tools at a very favourable price. In addition, all products offered are available very quickly. Especially the quick availability is enormously important for many bidders if they want to react to short-term increases in demand.
Thus, auction houses offer a great opportunity to find new tools quickly. On the seller's side, tool auctions mean quick liquidity and thus the opportunity to reinvest the proceeds generated. Particularly appealing for companies planning a workshop liquidation or factory closure.
In contrast to a classic face-to-face auction, an online auction can be expanded at will, so that even large liquidations do not have to be specially subdivided. Above all, this saves time in the search for suitable tools and information. An online auction is also very interesting for sellers, because with an increasing number of participating bidders, the hammer prices also grow steadily.
Consequently, we as an auction house enjoy an ever-growing community.
Most auctioneers specialise in certain industries. Accordingly, exactly the right audience is addressed at a tool auction. For this reason, you should not look for the right buyer, but rather use the best marketplace. It is not uncommon for sellers to achieve significantly higher realisation proceeds with this method.
In order to participate in a tool auction as successfully as possible, you should follow a few tips. A smooth auction can only take place with an experienced auctioneer and certain strict legal requirements. As a rule, the buyer has to pay a so-called buyer's premium after the hammer falls. The buyer's premium is usually in the range of 15 to 20 percent. Basically, every tool auction proceeds in the same way.
Bidders have the opportunity to take a close look at the tools in advance. The basic rule at a tool auction is: bought as seen. The bidder who has won the auction therefore has no possibility to return the tools. Nor does the consignor have to provide a warranty or guarantee, as it can be assumed that a knowledgeable buyer is in a position to check the condition of the tool.
Have your items appraised to get the best possible results at a tool auction. For more information, feel free to visit our FAQs.